Nitrocellulose w/grid, 0.8µ, 80mm, 100P, Nitrocellulose w/grid, 0.8µ, 80mm, 100P

Cellulose nitrate membrane filters, white with black grid, presterilized in bags of 5 The system consists of the MD8 airscan® air sampler and disposable gelatine filter units. The system is routinely used for the quantitative detection of airborne organisms, mainly in sterile areas of class A and B (classification according to ?EU-Guide for GMP?), isolators, or blow-fill-seal machines. The very high air flow rate of 8 m³/h enables isokinetic sample removal at flow speed usual in laminar flow as well as for the filtration of 1 m³ air very quickly (less than 8 minutes). The filter unit can be placed remote from the air sampler. The MD8 airscan® air sampler allows to adjust selectively and easily air flow rate and sample removal speed. By means of a specially developed calibration unit (see accessories) the user can calibrate the MD8 airscan® locally, e.g. within the scope of validation steps. After removing the sample, the gelatine filter can be placed directly on the agar culture medium for incubation and colony growth. Accurate results / validatable retention Compliant with regulations such as EU-GMP Isokinetic sampling in laminar-flow areas (no generation of turbulence) Can be calibrated on-site Suitable for use in class A/B clean rooms, BFS machines and isolators, because the pump can be positioned outside the critical work area Lowest bacteria counts can be measured, due to the short sampling time of 1 m³ of air Membrane filter for air- and particle monitoring with the MD8 Airscan These membrane filters are applied, if gelatine membrane filters can not be used. eg. at Ambient Temperature: >30°C and Humidity: > 80 %. Pack size: 100 pc. Material: Cellulosenitrate, white and black gridded Pore size: 0.8 µm Diameter: 80 mm sterile packed in bags / 5 pc. each